Premier BB-5653USBTL Manual De Instrucciones página 17

1. LED Display
2. MP3 CONTROL
Play/Pause Button: The Play/Pause button will control the BLUE-CONNECT, USB/ Memory card, FM
functions.
MODE Button: Press this button to change USB/ Memory card, Blue-connect and FM radio. Blue-
connect set as default when turning on the speaker.
Repeat Button: Press this button to select between repeating the current track. Repeating all tracks
and repeating one tracks on the USB or Memory card. When repeating the current track R1 will display
on the screen. When repeating all tracks RA will appear on the screen. When the repeat function is off,
RO will display on the screen.
Previous / VOL- Button: Press this button to move to the previous track on the USB , Memory card or
Blue-connect. Press and hold this button to reduce the volume.
Next / VOL+ Button: Press this button to move to the next track on the USB , Memory card or Blue-
connect. Press and hold this button to increase the volume.
3. USB INPUT: Insert your Digital USB flash drive into this slot. The unit will only read MP3. WMA files
from Digital USB flash drive. The maximum storage size of the USB flash drive cannot exceed 32GB. ( it
has memory function,when you take out the USB-A from the fifth song, the USB-B will stay at the fifth
song when you insert )
4. SD CARD INPUT: Insert your Digital Memory card into this slot. The unit will only read MP3. WMA
files from Memory card. The maximum storage size of the Memory card cannot exceed 32GB. ( it has
memory function,when you take out the USB-A from the fifth song, the USB-B will stay at the fifth song
when you insert )
For BLUE-CONNECT:
1. SELECT " BLUE-CONNECT" MODE
2. TURN ON BLUETOOTH FUNCTION ON YOUR
MOBILE AND SEARCHING THE "BB-5653USBTL" SIGNAL
3. SELECT "BB-5653USBTL"AND ESTABLISH CONNECTION
4. INPUT PASSWORD "0000" IF ASK FOR
5. SELECT THE SONG AND PLAY THROUGH YOUR MOBILE
For FM:
1) Turn on the speaker, press "MODE" TO FM, Long press "PLAY/PAUSE'' for 2 seconds, the FM
search the channels automatically.
2) When search finished, the searching would stop by itself. It would stop at the CH1. then you can
press "PREVIOUS" and "NEXT" to choose the channels
5. MIC1 VOLUME: This knob determines the signal level which will be sent by MIC1.
6. MIC2 VOLUME: This knob determines the signal level which will be sent by MIC2.
7. 6.35mm Microphone 1 input: Connect your microphone to these inputs. The microphone volume will
be controlled by the microphone knob.
8. 6.35mm Microphone 2 input: Connect your microphone to these inputs. The microphone volume will
be controlled by the microphone knob.
9. XLR Microphone 1 input: Connect your microphone to these inputs. The microphone volume will be
controlled by the microphone knob.
10. XLR Microphone 2 input: Connect your microphone to these inputs. The microphone volume will be
controlled by the microphone knob.