Installing The Rack Stabilizer Feet - Dell PowerEdge 4220 Guia De Instalacion

Figure 1-12. Adjusting the Leveling Feet
1 leveling foot stem
3 leveling pad

Installing the Rack Stabilizer Feet

WARNING:
installed could cause the rack to tip over, potentially resulting in bodily injury
under certain circumstances. Therefore, always install the stabilizer feet before
installing components in the rack.
Install stabilizer feet on the rack as follows:
• Install front and side stabilizer feet on a standalone rack.
• Install front stabilizer feet on all racks in a suite, and install left or right
stabilizer feet on the racks at each end of a suite.
24
Installation Guide
Installing systems in a rack without the front and side stabilizer feet
2 hex nut
1
2
3