Kicker QS Serie Manual Del Propietário página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CROSSOVER CONFIGURATION
Before mounting and wiring the QS coaxial system, determine which configuration you will use for the
speakers and crossovers.
QS Crossover
Configurations
Conventional 2-way
Bi-amplified
The KICKER QS crossover can be configured as a conventional 2-way crossover by installing the
included INPUT jumper into the - MID + - TW + input terminals as shown below. In this configuration,
the amplified signal from your source unit or amplifier should be wired to the + and - terminals indicated on
the INPUT jumper.
The QS crossover can also be configured for bi-amp wiring by removing (or simply not installing) the
INPUT jumper. To use the bi-amp configuration, you must connect two amplified signals to each
crossover (you will need at least four amplifier channels).
QS crossover
ADVANTAGES
easy install | ideal when available
amplifier channels are limited
optimal sound quality; more efficient
usage of amplifier power
CONSIDERATIONS
audio fidelity not quite as high as
bi-amplified configuration
requires at least 4 amplifier
channels | slightly trickier install
INPUT jumper.
Install only for 2-way configurations;
do not install if bi-amping.
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Qsc67Qsc69

Tabla de contenido