Koenic KIP 2431 Manual De Instrucciones página 23

Cookware
Suitable cookware:
Fig.
1
Only use pans and pots which are
declared as suitable for induction
cooking with a bottom diameter of 14
to 22 cm.
Not suitable cookware:
• Heat-resistant glass, ceramic, copper
or aluminium cookware
• Cookware with curved bottoms or
with feet
• Cookware with a diameter less than
14 cm
Operation
Place the Induction cooker on an even,
Fig.
2
stable and heat resistant surface. Keep
a distance of 5 -10 cm away from the
wall or any other objects.
Connect the power plug to a suitable
Fig.
3
power outlet. An acoustic signal sounds
and the power indicator lights flashing
once. The induction cooker is on
standby mode now.
Note: If the cooking surface temperature is
> 50 °C H is shown in display.
Place a suitable pot/saucepan on the
Fig.
4
center of the cooking zone.
Note: Ensure that the pot/saucepan is clean
and dry on the outside.
The hobs can be used separately or at
Fig.
5
once. The use is explained based on
one hob. The left hob has 2000 W, the
right hob has 1500 W.
IM_KIP2431_170223_V05_HR.indb 23
Press the ON/Standby button for
Fig.
6
approx. 2 seconds to switch on a
certain hob which is indicated by an
acoustic signal and a red indicator LED.
Choose temperature or power mode
Fig.
7
using buttons
mode is indicated by a red LED.
Choose the desired power
Fig.
8
(200 - 2000/1500 W in 200/100 W
steps) or temperature (60 - 220 °C in
20 °C steps) by pressing +/– buttons.
In turned on product will switch to
Fig.
9
standby mode, when
• after 60 seconds no setting was
done
• after 60 seconds after a setting the
hob is left empty
After use press ON/Standby button to
Fig.
10
turn the product to standby.
Warning
Always unplug the product to ensure it is
completely turned off.
English
and . The preset
23
24/2/17 6:02 PM