IR-Headphones
1
6
Important notes
The channel at the am IR transmitter must
match the selected channel (A / B channel
selector switch 2) at the headphones. The
channel designation may differ for third-par-
ty products.
The max. range depends upon the IR trans-
mitter of the source device. More detailed
information can be found in the operating
instructions of the source device.
Please ensure that there are no obstacles be-
tween source device and headphones.
Please remember that the range is reduced
in case of heave exposure to the sun.
Operating instructions
1. Switch on the device that has the in-
frared transmitter (e.g. ceiling-mounted
monitor).
8
7
2
3
4
5
1 Infrared sensors
2 A / B channel selector switch
3 On/off switch
4 POWER (ON LED)
5 Volume control
6 Battery compartment cover
7 Ear cushion
8 Adjustable headband
2. Switch on the On/Off switch 3 at the
headphones (control indicator POWER
4 is illuminated).
3. Adjust the desired channel (A or B) with
the channel selector switch 2
4. Adjust your preferred volume using the
volume control 5 on the left whilst mak-
ing sure you do not obstruct the sen-
sors.
IVHS-02
5