Koenic KWM 62212 A3 Manual De Instrucciones página 23

Caution
• Make sure that both hatches are locked
correctly. The metal hook must fit correctly
in the recess.
• Make sure that no laundry is trapped
between the hatches and the drum or
between the two hatches.
• Check the roller before each laundry. It
must roll smoothly.
Selecting and filling in detergent
Caution
• Keep detergents out of the reach of
children!
• Observe the instructions of the detergent
regarding dosage and storage.
• Only use detergents suitable for washing
machines and make the right selection,
taking into account the kinds of laundry to
be washed (cotton, colored, white etc.).
• Do not use bleach, as it can damage the
washing machine and laundry.
1. Note the different compartments:
Fig.
8
I : Detergent for pre-wash
II : Detergent for main wash
: Fabric softener for rinsing
2. Fill in laundry detergent and fabric
softener according to manufacturer's
instructions.
Note on foam detection: If too
much detergent is used, excessive
foam is formed. The foam formation
is checked and excessive foam is
removed.
Start washing
1. Close the lid. Make sure it is correctly
engaged.
2. Turn on the washing machine with the Ein-/
Aus switch.
IM_KWM62212-A3_191107_V09_HR.indb 23
3. Use the program selector to select a
suitable program and, if necessary, a
suitable additional function. Please refer to
the following Program table.
4. Use the TEMPERATUR button to change
the temperature if the preset temperature
does not meet your requirements. The
higher the temperature the more energy is
consumed.
5. If necessary use the SCHLEUDERN button
to select a different spin speed if the preset
speed does not meet your requirements.
The higher the spin speed, the drier but
also more creased the laundry is. High spin
speeds also reduce the life of the washing
machine.
Note:
Only use low spin speeds for delicate
garments.
6. By pressing the Funktion button, select
one of the additional functions, pre-wash
or extra rinse
7. Press the timer button STARTZEIT
VERZÖGERUNG to set a later time for the
machine to start. By pressing the button
several times a delayed start time of 3, 6
or 9 hours can be selected. To do so, follow
the steps 1 to 6, then use the STARTZEIT
VERZÖGERUNG button to set the start time
and then press the Start/Pause button. If
the preset time has elapsed, the washing
machine will automatically turn on and the
washing time will be shown on the display.
8. Start the washing process by pressing the
Start/Pause button.
Caution
The door may only be opened if the
appliance is not running and the indicator
light is off, e.g. after a washing program is
finished. Do not try to open the door while
the appliance is running.
English
.
23
8/11/2019 10:11