Control Panel - Schulz CAP10.000 Manual De Instrucciones

4. Installations of air conditioner of 12.000btu/h
• Fix the square end of the tube at the exit of the apparatus;
• Place the adapter on the other end of the exhaust pipe by turning counterclockwise.
• Attach the adapter in the window slightly open using the slider kit (part A and B).

9. CONTROL PANEL

4. Control Panel air conditioner of 10.000Btu/h
press this button to turn on/off the unit.
press this button to select Cooling, Automatic adjusting mode or Fan mode.
press this button to select high, low fan speed.
when stand-by time press this key to set automatic time on; when running time press this key to set
automatic time off.
press this button to set the temperature higher when cooling; press this button to adjust time longer when
timing; to exchange Fahrenheit and Celsius when press both UP and Down button.
press this button to set the temperature lower or higher when cooling; press this button to adjust time
shorter or longer when timing; to exchange Fahrenheit and Celsius when press both UP and Down button.
FIGURE 8.10 FIGURE 8.11
FIGURE 9.1
38