Specific Safety Rules; Safety Guidelines - Definitions - BLACK&DECKER PD400L Manual De Instrucciones

8) Labels on tool
The label on your tool may include the following symbols:
Read Instructions Manual
Use Eye Protection
Use Ear Protection
• Hold tool by insulated gripping surfaces when performing an operation where the cutting
tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the operator.
• Use clamps or another practical way to secure and support the workpiece to a stable
platform. Holding the work by hand or against your body leaves it unstable and may lead to loss
of control.
SAFETY GUIDELINES/DEFINITIONS
It is important for you to read and understand this manual.
The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS.
The symbols below are used to help you recognize this information.
DANGER! indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING! indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION! indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury..
CAUTION! Used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
FUNCTIONAL DESCRIPTION (FIG. A)
1) Trigger switch
2) Forward/Reverse/Lock off slider
3) Pivot release button
4) Bit holder
5) Light ring/Clutch ring
6) Hex spindle
7) Charger port
8) Charger
9) Charger plug
SAFETY WARNINGS AND INSTRUCTIONS: Charging
1. This manual contains important safety and operating instructions.
2. Before using battery charger, read all instructions and cautionary warnings on battery
charger and product using battery.
CAUTION! To reduce the risk of injury, use charger only with this product. Batteries in other
products may burst causing personal injury or damage.
V ........... Volts
A ........... Amperes
Hz ......... Hertz
W........... Watts
min........ minutes
........ Alternating Current
........ Direct Current

SPECIFIC SAFETY RULES

n
.../min.... Revolutions or Reciprocation
23
ENGLISH
.......... No-Load Speed
0
........ Class II Construction
........ Earthing Terminal
........ Safety Alert Symbol
per minute