Electrical Connection - Imperia PastaFacile Manual De Instrucciones

Before each time of use: follow the instructions given in the "CLEANING AND MAINTENANCE" paragraph,
FITTING THE ACCESSORIES ON THE PASTA MACHINE
- After choosing the required accessory, insert the coupling fins (16) of the accessory with the fins (17) of
the pasta making machine, push downwards gently until firmly clamping the accessory to the pasta machine.
This procedure is to be followed for all the appliances shown in Fig.B
FITTING THE UNIVERSAL GUIDE BRACKET
- Turn the knob (9) counter-clockwise as far as it will go to bring out the clamping pin (11) and position the motor
retaining lever (10) as shown in Fig. D.
- Insert the clamping pin (11) in the vice opening (19) present on all pasta making machines.
- Rest the universal guide bracket on the base of the pasta machine (18) and against its side Fig. E/F.
- Push the bracket to the right and turn the knob (9) clockwise until completely clamping the bracket against the
body of the pasta making machine Fig. F.
FITTING THE PASTAFACILE MOTOR
- All assembly and disassembly operations of the "PastaFacile" motor must ALWAYS be carried out without
the plug in the socket.
- Insert the motor finned pin (3) in the crank housing hole (20) present on all pasta machines.
- To facilitate engagement, simply turn the gear motor until the fins of the pin (3) coincide with the notches of
the hole (20), after coupling, push to completely insert the pin (3) in the hole (20) Fig. H.
- Turn the motor counter-clockwise until the resting wing (7) inserts perfectly in the guide (8) of the universal
guide bracket Fig. H, then turn the retaining lever (10) counter-clockwise pulling it gently outwards until it stops
and compresses the motor against the pasta machine Fig. L.
FITTING THE PASTAFACILE WITH "RAVIOLIMAKER" AND
"MILLEGNOCCHI" ACCESSORIES
To fit the Pastafacile gear motor with the "RavioliMaker" and "Millegnocchi" accessories follow the procedure
described in the "FITTING THE PASTAFACILE MOTOR" paragraph.
But firstly on the finned pin (3) of the gear motor, insert the adapter extension (4) specifically sized for the crank
housing hole (20) of these accessories (14 and 15).
USING THE "PASTAFACILE" MOTOR
The Imperia PastaFacile motor has a three position switch (2).
FUNCTIONS OF THE SWITCH "2"
POSITION I = Running constantly - Fixed speed
POSITION 0 = OFF - Rest condition (the motor does not turn)
POSITION II = Running intermittently - In this position the switch only has a button function and works only
when it is pressed, the PastaFacile motor stops as soon as it is released.
"Intermittent" operation becomes essential when needing to use the Imperia RavioliMaker accessory and its
purpose is to allow a correct distribution of the filling when forming ravioli.
Before operating the machine, make sure that your home voltage is 230 V (frequency 50 Hz). Do not use
another type of power supply.
Before plugging the power lead in the current socket:
- ALWAYS MAKE SURE THAT THE SWITCH IS ON POSITION "0" (rest position)
- Then insert the power lead connector in the power lead input connector (5) as shown in Fig. A.
The manufacturer declines any liability for harm to persons or property deriving from the failure to adhere to these
instructions. Where necessary fit an adapter to the plug, making sure it is suitable for the power lead.
Turn the switch to position "0" (rest position) and remove the power lead plug from the socket.
ASSEMBLY
! WARNING !
FITTING PROCEDURE

ELECTRICAL CONNECTION

IN AN EMERGENCY
8
(Fig.C)
(Fig.D/E/F)
(Fig. G/H/L)
(Fig. M)
(Fig. A)