Grunkel CP-ECO3 Manual De Instrucciones página 16

Mode
ECO
Normal
Max
Adjust the temperature by turning the thermostat knob to the required position. The
icons on this knob will help you choose the most adecquate temperature according to
the type of clothes to be ironed.
After 90 seconds approxiumately, the max steam light indicator and iron ready light in-
dicator will come on. The iron is ready for ironing.
Steam ironing
When using the appliance for the first time, iron flat clothes.
To activate the steam release it is necessary to wait for 30 seconds approximately after
pressing the steam button or the steam burst button.
NOTE: Small amounts of steam may be released from the soleplate after releasing the
steam button or the steam burst button.
CAUTION: Do not unplug the appliance if there is still steam being released from the
soleplate. Wait until all steam has been completely released.
This appliance can generate steam in vertical position and therefore can be used to iron
with a steam jet.
If the appliance beeps while the water level indicator light flashes while you are ironing,
it means that there is no water in the water tank. If you wish to carry on with the ironing,
please add water to the water tank. The beep will stop and the water level indicator light
will go off.
Dry-ironing
Plug the power cord into a suitable electrical outlet.
Press the on / off button. The power light indicator will come on.
Adjust the temperature by turning the thermostat knob to the desired position.
Wait until the iron ready light indicator comes on.
Continous steam
(g / min)
30
40
50
16
Steam burst
(g / min)
65
90
110