Grunkel CP-ECO3 Manual De Instrucciones página 18

In order to get professional results, fabrics must be damped with steam and then dry-iro-
ned:
1. Place the iron at a 20cm distance from the fabric and press the steam button. Iron the
clothes in circular movements so the steam moistens the fabric. Light creases require
only a few seconds under the steam. On heavy fabrics or difficult creases the steam
should be apply for a longer time.
2. Check that the thermostat knob is set on the correct position for the clothes to be
ironed. Release the steam and dry iron the clothes. The iron's soleplate will prevent the
fabrics from wearing.
Type of fabric
Acetate
Acrylic
Nylon
Polyester
Rayon
Silk
Wool
Light cotton
Light linen
Cotton
Intermediate
linen
Starched fabrics
Linen
Thermostat
Recommendations
knob position
Dry ironing.
This type of fabric generally requires very
light ironing.
Dry ironing.
Iron from inside to outside.
When ironing mixed fabrics, select the
lowest recommended temperature.
Dry ironing.
Iron from inside to outside.
Steam ironing.
Iron from inside to outside.
Place a thin cloth over the fabric to avoid
abrasion.
Steam ironing.
Dampen the fabric before ironing.
Heavy fabrics should be ironed first.
Dark or embroidered clothes should be iro-
ned inside out.
Steam ironing.
Use a large amount of steam when ironing
dark clothes. Iron from inside to outside to
avoid abrasions.
Place and iron lapels and cuffs on the co-
rrect side.
18