Alarm Setting; Snooze Function - Roadstar HRA-500IP Manual De Instrucciones

5. Press the PLAY/PAUSE/FM button again to confirm the time.
6. Each state as shown above will be cleared if the key is not pushed in10 seconds.

ALARM SETTING

During in the STANDBY OFF/ON mode.
1. After adjusting clock, press the ALARM button on the unit (20) for a few seconds, " and
"07:00" appears on the display and the HOUR digit flashes.
2. Press the TUNE/CLK+ or TUNE/CLK- button (16,14) to adjust it.
3. Press the PLAY/PAUSE/FM button again, the MINUTE digit will start flashing, adjust it by
pressing the TUNE/CLK+ or TUNE/CLK- button.
4. Press the PLAY/PAUSE/FM button once more to confirm and order ALARM time.
5. After adjusting "TIMER -ON", the ALARM VOLUME LEVEL appears on the display. Adjust
it by pressing the TUNE/CLK+ or TUNE/CLK- button.
7. Now the "FM Memory Station" appears on the display with flashing , adjust by pressing
the TUNE/CLK+ or TUNE/CLK- button.
5
English
6
English
8. Press the PLAY/PAUSE/FM button again, the timer "Buzzer Level" indicator appears on the
display and flashes, adjust the timer volume high or low by pressing the TUNE/CLK+ or
TUNE/CLK- button.
9. Each enable state as shown above will be cleared if the button is not pushed in 7 seconds.
10. The unit will be switched on automatically at "ALARM ON" order and start playing , the unit
will be switched off automatically at "ALARM OFF" order.
ACTIVATING THE ALARM WAKE UP MODE
1. Press repeatedly the ALARM button to activate the alarm function and select the wake-up
mode.
2. The alarm mode and corresponding icon TUNER / iPod / BUZZER / ALARM OFF appear
in sequence to the display.
NOTE: If Alarm wake-up to iPod mode is selected and no iPod /iPhone/iPad is fitten in the
docking or recognized, when the alarm arrive the buzzer wis activated automatically.
To switch OFF the Alarm, press repeadtly the ALARM button until the Alarm icon disappear
from the display.

SNOOZE FUNCTION

During the alarm, press the SNOOZE button will temporary switch OFF the alarm for 5 minutes
and the snooze icon will be displayed. This is repeatable in the hour alarm duration.
EQ CONTROL (FROM REMOTE CONTROL)
EQ shows the BASS and TREBLE sound tone.
When you press the EQ button, the sound tone BASS or TREBLE can be changed by pressing
the TUNE/CLK+ or TUNE/CLK- bottons.