REHM BOOSTER.PRO 170 Instrucciones De Servicio página 5

These operating instructions are no substitute for training given by
REHM service staff.
The documentation relating to any optional accessories installed must
also be noted.
Alterations to the No alterations to the equipment are permitted, nor are the attachment or
equipment installation of any additional equipment. Such actions will result in
cancellation of any right to make warranty and liability claims.
Warranty rights will also be forfeited if any work is performed on the unit
by third parties or if any safety devices are deactivated.
Despite its weight of only 4.1 kg / 5.5 kg and its extremely compact
dimensions, the BOOSTER.PRO 170 / BOOSTER.PRO 210 is packed
with power. Together with the robust housing made of highly resistant
steel and elegant plastic, these features make the BOOSTER.PRO the
ideal companion for arduous outdoor work on building sites. In the
workshop too, the new electrode welding inverter displays all the
features you would expect of a professional unit:
• 150 A / 170 A electrode welding current with 50% duty cycle in the
BOOSTER mode.
•
140 A / 160 A electrode welding current with 60% duty cycle in the
Fuse-Hold mode.
• TIG welding with Lift-Arc -170 A / 210 A TIG welding current with a
duty cycle of 50%.
• Shielding gas supply control on BOOSTER.PRO 170 with gas
management.
• INTIG-Energy (Intelligent Ignition Energy) – intelligent ignition energy
control for electrode and TIG functions.
• EPC (Electronic Power Control) – continuous electronic monitoring of
power supply voltage.
• Fuse-Hold function – electronic monitoring of current drain prevents
fuse tripping.
• Anti-stick function – prevents electrode burnout in the event of
accidental sticking.
• ELSA system (Electronic Stabilised Arc) – allows uninterrupted welding
even with connecting cables up to 100m long.
• Temperature-controlled fan control – for automatic adjustment of
cooling power required.
•
Protection class IP23: for use even in difficult ambient conditions.
The BOOSTER.PRO is designed for all types of welding work on
GB
4