05 |
OPERATION
5.1 CHARGING THE SOLAR PANEL VIA THE SOLAR CELL
Place the Solar Panel into sunlight, with the solar cells facing to the sun.
While charging, the LED capacity indicator (3) flashes blue and the LED charging indicator (4) lights red. The Solar Panel is fully
charged when all four LEDs of the LED capacity indicator (3) light blue constantly.
With full sunlight conditions, the charging time of an empty Solar Panel is approx. 4 hours.
5.2 LED CAPACITY INDICATOR
Press the On/Off button (5) to show the remaining power of the Solar Panel.
The blue LED charging indicator (3) displays remaining power as follows:
1 LED
0 – 25% Capacity
2 LEDs
25 – 50% Capacity
3 LEDs
50 – 75% Capacity
4 LEDs
75 – 100% Capacity
5.3 CHARGING EXTERNAL DEVICES
Connect the device you want to charge, with one of the two USB ports (6) using the USB cable (*).
•
(*) For Apple® series products please use the original USB cord of your Apple® device.
With the SP-10000 you can also charge 2 devices at the same time.
•
Press the On/Off button (5). The LED capacity indicator (3) lights blue and the charging process starts.
•
After charging is completed, turn off the Solar Panel pressing the On/Off button (5). Disconnect the charged device from the
•
Solar Panel.
06 |
CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth
to clean the outer parts of the device. Make sure to take the device off power before cleaning! Store the device in a dust-free,
dry and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.
07 |
SPECIFICATIONS
Built-in battery
Battery capacity
Solar cell capacity
USB Output
USB cable
Charging time via solar panel
Operating temperature
Dimensions
Weight
Lithium Polymer rechargeable battery
3.7V/10.000 mAh (₌
37Wh)
^
5.5 V/12 W
5 V/2.4 A (2x)
USB standard A plug / USB Micro B plug
approx. 4 hours
10°C - 45°C
folded approx. 155 x 260 x 40 mm
open approx. 400 x 260 x 30mm
approx. 615 g
09