Serato Dj Pro Software - PIONEER DJ DDJ-XP2 Manual De Instrucciones

Others
USB port USB 2.0 port x 2
Display resolution Resolution of 1280 x 768 or greater
You'll need an internet connection to register your user
Internet connection
account for rekordbox and to download the software.
• For information on the latest system requirements, compatibility,
and supported operating systems, visit the [System requirements]
page under [Support] on the rekordbox website below.
rekordbox.com
• Be sure to use the latest version and latest service pack for your
operating system.
• Operation isn't guaranteed on all PC/Mac models, even if the
system requirements are met.
• Depending on power-saving settings and other conditions of the PC/
Mac, the CPU and hard disk may not provide sufficient processing
capabilities. For laptops in particular, make sure the PC/Mac is in
the best condition to provide constant high-level performance when
using rekordbox (e.g. by keeping the AC power connected).
• To use the internet, you need a separate contract with an internet
service provider, which you may have to pay for.
PC/Mac to use the rekordbox dj software
Your PC/Mac must have USB 2.0 ports to connect with the unit.
• The PC/Mac must have two USB 2.0 ports, one for connecting with
the unit, and another for connecting with the DJ mixer or audio
interface.
• If your PC/Mac has only USB Type-C ports, use a USB Type-C
(male) - USB Type-A (female) cable.
Using the unit with rekordbox dvs vinyl/CD
You need one of the following equipment to use the unit with rekordbox
dvs vinyl/CD.
• DJ mixer compatible with rekordbox dj (such as DJM-S9 or
DJM-900NXS2)
• Audio interface compatible with rekordbox dj (such as INTERFACE
2)
• DJ controller compatible with rekordbox dj (such as DDJ-1000)
Connecting the unit to a system which
controls rekordbox dj using DJ players
You need the following equipment to connect the unit to a system which
controls rekordbox dj using DJ players.
• DJ players compatible with rekordbox dj (such as CDJ-2000NXS2
or XDJ-1000MK2)
• DJ mixer compatible with rekordbox dj (such as DJM-900NXS2)
Using the unit with a DJ controller
You need a DJ controller compatible with rekordbox dj such as
DDJ-1000 or DDJ-800.
Using the unit as a sub controller for DJ
players
You need DJ players such as CDJ-2000NXS2 or XDJ-1000MK2.

Serato DJ Pro software

About the Serato DJ Pro software
Serato DJ Pro delivers all the features and performance to meet the
demands of DJs at the top of their game and sets the new standard for
digital DJ software.
• Serato DJ Pro is plug and play with this unit. Download the latest
version from the Serato website at serato.com.
• For help regarding Serato DJ Pro, visit support.serato.com.
Minimum computer requirements
Supported operating systems
Mac: macOS Mojave 10.14/macOS High
Sierra 10.13/macOS Sierra 10.12 (latest
update)
Windows® 10 / Windows® 8.1 /
Windows® 7 (latest service pack)
• 32-bit operating systems not supported.
Others
Your PC/Mac must have a USB 2.0 port to connect with
USB port
the unit.
Display resolution Resolution of 1280 × 720 or greater
You'll need an internet connection to register your user
Internet connection
account at Serato.com and to download the software.
• For information on the latest system requirements, compatibility,
and supported operating systems of Serato DJ Pro, visit the website
below.
https://serato.com/dj/pro/downloads
• Be sure to use the latest version and latest service pack for your
operating system.
• Operation isn't guaranteed on all PC/Mac models, even if the
system requirements are met.
• Depending on power-saving settings and other conditions of the PC/
Mac, the CPU and hard disk may not provide sufficient processing
capabilities. For laptops in particular, make sure the PC/Mac is in
the best condition to provide constant high-level performance when
using Serato DJ Pro (e.g. by keeping the AC power connected).
• To use the internet, you need a separate contract with an internet
service provider, which you may have to pay for.
PC/Mac to use the Serato DJ Pro software
Your PC/Mac must have USB 2.0 ports to connect with the unit.
• Your PC/Mac must have two USB 2.0 ports, one for connecting with
the unit, and another for connecting with the DJ mixer or audio
interface.
• If your PC/Mac has only USB Type-C ports, use a USB Type-C
(male) - USB Type-A (female) cable.
Using the unit with Serato DVS vinyl/CD
You need one of the following equipment to use the unit with Serato
DVS vinyl/CD.
• DJ mixer compatible with Serato DVS (such as DJM-S9)
• DJ controller compatible with Serato DVS (such as DDJ-SX3)
Using the unit with a DJ controller
You need a DJ controller such as DDJ-SX3 compatible with Serato DJ
Pro.
Using the unit as a sub controller for DJ
players
You need DJ players such as CDJ-2000NXS2.
CPU and memory required
®
Intel processor Core™ i3, i5, i7 and
i9 1.07 GHz or better
4 GB or more of RAM
Intel ® processor Core™ i3, i5, i7 and
i9 1.07 GHz or better
4 GB or more of RAM
En
5