Commands Code; Arming/Disarming; Commands Code Modify - hilton TDX16 Manual Para El Usuario

TDX16 -
User's manual
4.3

COMMANDS code

The COMMAND Code (by default
allows you of enable or disable of the burglar alarm system or change the COMMAND
CODE.
4.3.1 Arming / Disarming
Once you have typed the COMMAND Code, press in sequence keys
displays:
press the button
9
with th button
If you visualize :
Is possible utilize the button
While using the button
To exit this menu, press the key
4.3.2

COMMANDS code modify

Once you have typed the COMMAND Code, press in sequence the keys
is displayed:
for change the COMMAND code, press the button
Insert the code you want it displayed :
NOTE : Accessing the COMMANDS cannot change the MASTER code.
16
I m p : D I S I N S E R I T O
7 = I N S
7
the dialer, command the insertion of the burglary system.
not perform any operation.
I m p : I N S E R I T O
7 = I N S
9
to operate the disconnection of the system,
7
does not command any operation.
S E L E Z . C O D I C E
C O D I C E C O M A N D I
C O D I C E C O M A N D I
- - - -
S E L E Z . C O D I C E
C O D I C E C O M A N D I
1 2 3 4
) at difference from the MASTER code
9 = D I S
9 = D I S
.
security
1 2 3 4
1 2 3 4
and
1 2 3 4
and
si visualizza :
1
1
2
2
;