Oster GCSTES-100 Manual De Instrucciones página 15

Heated press bar – Works like an iron soleplate to press wrinkles out.
Wide steam exit – Provides wide coverage of steam for your garments and fabrics.
Continuous Steam switch, gives you the option to steam on demand.
Removable water tank with water inlet tube – Easy to remove for quick refills. A water
inlet tube inside the water transmits the water from the tank to steamer head. A loud
vibrating noise indicates that the water is low in the water tank and time to refill.
Red power indicator light – Lights up when unit is plugged in to an electrical outlet.
Red ready indicator light – Turns off to indicate the unit is ready for use.
FILLING WATER TANK
Warning: To avoid personal injury and damage to the unit, only add water to the water
tank. NEVER add cleaning solutions, perfumes, oils or any other chemical additives.
Note: Your Steamer is designed to be used with tap water. However, if you have hard
water, we recommend using distilled water for better results.
1. Place Steamer on a flat surface.
2. Hold the water tank with one hand while pulling the tank away from the steamer body.
3. Take the water tank to a sink. Pull the rubberized water-fill cover to open and pour tap
water from the faucet into the water-fill opening until it reaches the Max water level in
water tank (Figure 2). If water spills outside of the tank, or within the center water tank
cavity, wipe it dry with a paper towel or cloth.
About Your Features
Operating Instructions
Figure 1
Figure 2
English - 4