Manual Search; Storing A Dab Radio Station; Listen To A Stored Dab Radio Station; Display The Dab Information - Oglo MB-O-700-D Instrucciones De Uso

Manual search

The manual search enables you to perform a precise search on a frequency. This is useful if you want to
get the best possible reception for a particular station or if you want to get the channel list of a certain
frequency without having to perform a complete search.
Press the MENU button to enter the setup menus.
1.
Select the reglage manuel (manual setup) menu with
2.
automatic search begins.
Use the or buttons to toggle between the frequency ranges 5A to 13F.
3.
Press to open the selected range. During the manual search, no stations are broadcast. The
4.
stations found in the frequency range are automatically added to the list of stations already stored.
To access it, quit the manual search and browse through the list of stored stations.
You can also hold down the or
5.

Storing a DAB radio station

When the micro-stereo is turned on, set it to the DAB+ station of your choice.
1.
Press and hold the PROG button. Memory number 01 fl ashes on the display. Use the
2.
buttons to select the desired memory number. Press
DAB+ station. MEMORISEE (stored) appears on the screen.
Repeat as often as necessary.
3.
The programmed stations remain stored in the memory, even after the appliance is switched off.
•
Programming a new station to an already assigned number automatically deletes the previously
•
saved station.
You can program up to 30 radio stations.
•

Listen to a stored DAB radio station

Briefl y press the PROG button and then use the
•
memory number (from 1 to 30) and listen to the stored radio station.

Display the DAB information

In DAB+ mode, the micro-stereo displays information about the station currently playing. In addition
•
to the current time, this includes the name of the selected radio station as well as other information
transmitted by the transmitter's secondary DLS (Dynamic Label Segment). This may include, for
example, the title and name of the artist or contact information or additional information provided by
42
or , then press
buttons for 2 seconds to perform an automatic scan.
to confi rm the programming of the
or buttons to select the desired
the transmitter.
When the information is longer than 16 characters, it is displayed as scrolling text.
•
By repeatedly pressing the INFO button,you can scroll through the Info menu and view all available
•
information (transmission type (PTY), station name, channel and frequency, signal error rate, bit rate
and audio type, DLS text information, DL Plus info (if available), time, date, signal strength).
Accessing the confi guration menus
. The
Press the MENU button, then use the
system menu. Press the
Use the or
to confi rm.
reinitialisation
»
factory settings. The list of available stations will also be cleared and the preset memories will
be erased. After the factory reset, the micro-stereo starts a new automatic scan and renews the
station list.
VERSION LOGICIEL
»
or
installed on your micro-stereo.
langue (language): Select the language of your choice from the various options using the
»
or
or buttons on the remote control to select the
button to confi rm.
buttons to scroll through the different options, then press the
(reset): Select y to reset all the settings of your micro-stereo to the original
(software version): This option displays the version number of the software
buttons.
button
43