Weinmann & Schanz E200 Manual De Instrucciones página 43

9.4 How to change the number of events per day (option 4, table 1 on page 45)
2, 4 or 6 time/temperature events can be selected for all days according to individual need (not
used events will be skipped). If there is no need for e.g. 6 events, choosing 4 makes programming
easier.
9.5 How to switch on/off the automatic daylight savings time/standard time
change (option 5, table 1 on page 45)
You can select whether or not you want the time change to be carried out automatically. If it is not
carried out automatically, the time has to be adjusted manually (see 11.).
9.6 How to change the temperature display (option 6, table 1 on page 45)
The temperature display can be adjusted to individual needs, e.g. 3 = +0,3°; -15 = -1,5°.
9.7 How to restore the built in time temperature programs (option 7, table 1 on page 45)
Restores the pre-set programs to its original factory settings.
9.8 How to switch off the programmable thermostat (option 8, table 1 on page 45)
When switched off, the programmable thermostat no longer controls the room temperature and
the room is not heated. The display will show OFF, and the buttons will not function.
In the installer options (refer to Installation Guide) you can select whether or not frost protection
is to active (heating is called for if the temperature falls below 5 °C) when the programmable
thermostat is switched off.
43