Scope Of Delivery; Device Description; Proper Use; Air Cleaning - Soehnle AIRFRESH CLEAN 300 Instrucciones De Manejo

reach into the water or another liquid, even
if the device is no longer connected to the
power outlet at that time. Risk of electric
shock in case of moisture when the device
is reconnected to the power outlet. Use a
dry cloth to wipe moisture off. Do not touch
the power plug or device with wet hands.
Attention!
• If the power outlet used to operate the Air-
fresh Clean 300 is not properly connected,
the power plug of the device will get hot.
Ensure that you are using a properly con-
nected power outlet for the device.
• Do not place any objects on top of the Air-
fresh Clean 300 and do not sit on it.
• Use only the original filter by Soehnle,
which is specifically suited for this Airfresh
Clean 300.
• Do not use the Airfresh Clean 300 after
using incense for insect protection or in
places with oil residue or chemical vapours
or where incense sticks are burnt.
• Do not use the Airfresh Clean 300
near heaters, fireplaces, or gas-powered
devices.
• Do not stand on the device.

2. Scope of delivery

1 Soehnle Airfresh Clean 300
1 Soehnle combination filter for
Airfresh Clean 300
1 Operating manual

3. Device description

A : Housing cover
B : Housing
C : UV-C lamp
D : Combination filter (68106)
E : Removable housing bottom
F : Screw cap

4. Proper use

The Airfresh Clean 300 is intended exclusively
for cleaning room air.

5. Air cleaning

With the Soehnle combination filter you will
remove a multitude of unwanted particles
and odours from your room air. Micro-organ-
isms and viruses are destroyed by adding
UV-C light.
Prefilter:
Captures the first dust and allergen particles
EPA filter / activated carbon filter:
Captures dust, smoke, pollen, and other
allergens. Filters odours from the air.
UV-C light:
Destroys micro-organisms, e.g. germs, virus-
es, bacteria, and mould (e.g. mould toxins)

6. Prior to first use

1. Place the device upright on a solid and
level surface. Keep the device away from
walls.
2. To ensure optimum performance of the
device, please ensure that the air inlets
and air outlets are not covered.
3. Inspect the power cord to ensure that it is
not damaged.
4. Connect the power cord to a power outlet.
EN
9