Gardenline 43472 Manual Del Usuario página 5

Grill Gazebo
F
F
L
L
S
M
M
S
S
3. Screw in a Shelf Brace (L) onto the bottom of either end of the Shelf
(F), using two M6x15mm screws (S). Follow this same step with the
second Shelf (F).
Screw in Utensil Rack (M) with hooks facing inward into the bottom
of one Shelf (F), using three M6x15mm screws (S).
Place the Shelf (F) with the Utensil Rack (M) between Pole A (A) and
Pole C (C). Tighten four Knob Screws (V) through the Shelf Braces (L)
attached to the Shelf (F) and to Pole A (A) and Pole C (C).
Place the second Shelf (F) in between Pole B (B) and the second
Pole C (C). Tighten four Knob Screws (V) through the Shelf Braces (L)
attached to that Shelf (F) and to Pole B (B) and the second Pole C (C).
8
support@tdcusainc.com
MODEL: 43472 PRODUCT CODE: 43472 05/2016
Assembly Instructions
F
F
F
V
V
AFTER SALES SUPPORT
1800 599 8898
USA
Grill Gazebo
J
4. Insert the longer rib of the four Canopy Two Tier Ribs (G) into the
longer ends of the Main Canopy Connector (J) until they snap into
place and will not budge. Insert the shorter rib of the four Canopy
Two Tier Ribs (G) into the Top Canopy Connector (I) until they snap
into place and will not budge.
Insert two Canopy Ribs (H) into the shorter ends of the Main
Canopy Connector (J) until they snap into place and will not budge.
Place the longer ribs of the four Canopy Two Tier Ribs (G) in between
the Rib Braces (K) that are at the tops of Pole A (A), Pole B (B), and
both Pole C (C). Insert M6x28mm screw (U) through each Rib Bracer
(K) and through each long rib of the Canopy Two Tier Ribs (G) and
tighten them down with a Bolt (W).
Place the Canopy Ribs (H) in between the Rib Braces (K) that are
at the tops of both Long Arches (D). Insert M6x28mm screw (U)
through each Rib Brace (K) and through each long rib of the Canopy
Ribs (H) and tighten them down with a Bolt (W).
AFTER SALES SUPPORT
1800 599 8898
MODEL: 43472 PRODUCT CODE: 43472 05/2016
I
I
G
G
H
J
W W
U
U
USA
Assembly Instructions
G
9
support@tdcusainc.com