CBX Flex-Seatunit Manual Del Usuario página 12

EN
From seatunit mode to prambody mode:
15
Open the two pushbuttons on footpart of the seat to open the fabric construction. You can see a
handle, pull the handle and release the foot part in lying position, all flat.
Loosen the clip (b) on backside of seatunit and push the backpart down, until you have a total
16
lie flat position.
The seat unit backrest can be adjusted to three different positions.
17
For prambody mode the complete lie flat position is needed. Like shown in (b).
The apron can be used for the seatunit and for the prambody. To fix it you need to press both
18
press buttons on each side towards the 2-1 seatunit. The upper part goes around the bumper bar
and can be closed with Velcro on both sides.
Important — Keep these instructions for future reference.
Compatible with BIMISI & LEOTIE.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
12
INSTRUCTIONS