Main Function; Installation - Lacor 69292 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
1.- Locate the unit at the proper counter height, in an area that is convenient for use. The
location should be level to prevent the unit or its contents from accidentally falling, and
strong enough to support the weight of the unit.
2.- Do not place anything on top of the Electric Glass Boiler ; doing so could damage Electric
Glass Boiler or subject personnel to possible injury.
3.- When setting up the unit for operation, make sure power to the unit is off. Failure to do so
could result in personal injury.
4.- To avoid damage to the Electric Glass Boiler or personal injury, always operate the device
with water inside.
5.- Unit is not weatherproof. For safe and proper operation locate the unit indoors where the
ambient air temperature is a minimum of 70ºF (21ºC) and a maximum of 85ºF (29ºC).
5.- Do not locate the Electric Glass Boiler in an area subject to excessive temperature or grease
from grills, fryers, etc. Excessive temperature could cause damage to the unit.
7.- Do not place Electric Glass Boiler in an area that restrict air flow around the front or rear of
the unit.
8.- Some exterior surfaces on the unit will get hot. Use caution when touching these areas to
avoid injury.
9.- Do not surpass the kettle´s MAX fill line since water may shoot out when it boils.
Heat water to the boiling point.
UNPACKING
1.- Open the large box. Remove all packing materials and protective covering from the unit and
parts.
2.- Remove all accessories and book instructions.
3.- Place the device on a hard surface, flat and level.
4.- Be sure to clean the kettle interior with soapy water and to dry it.
20
CAUTIONS
!

MAIN FUNCTION

INSTALLATION

Publicidad

Tabla de contenido
loading

Tabla de contenido