Cleaning & Maintenance; Maintenance And Cleaning - Lacor 69292 Instrucciones De Uso

PROGRAMMING THE TEMPERATURE
1.- Press the "PROG" Button and the red light will change to blue.
The display will show the programming temperature.
2.- Select the desired temperature between a range of 50-95 °C by using the TEMP - (reduce
temperature) and TEMP + (increase temperature).
3.- After 5 seconds, the programming will be saved and the display will show the real temperature
of the water.
4.- If you wish to make a change in the programmed temperature, press the PROG Button again
and use the TEMP – and TEMP + Buttons to select the temperature.
5.- Once the programmed temperature has been reached, the boiler will regulate the temperature
with a thermostat, keeping the water hot at the temperature selected.
NOTE: If no change is made within 2 hours while keeping the water hot, the boiler will
switch off.
GENERAL
The Electric kettle are designed for maximum durability and performance, with minimum
maintenance
CAUTION
USE ONLY NON-ABRASIVE CLEANERS. ABRASIVE CLEANERS COULD SCRATCH THE
FINISH OF YOUR ELECTRIC KETTLE MARRING ITS APPEARANCE AND MAKING IT
SUSCEPTIBLE TO SOIL ACCUMULATION.
CLEANING:
1.- When you are done using the kettle, turn it off, unplug it and disassemble the kettle from the
base.
2.- The base may be hot. It should not be cleaned with water; instead, simply use a damp
cloth.
3.- To avoid the accumulation of lime inside the kettle, it´s recommended to use filtered water.
4.- In order to eliminate lime that may have formed inside, squeeze a lemon in 1.5 L of water and
pour it inside the pitcher.
5.- Press the "ON/OFF" Button and let the water boil. Once the boiler is switched off, rinse the
Pitcher with water and let it dry before storing it.
22
CLEANING / MAINTENANCE