Logic M1 Manual De Usuario página 3

Getting Started
1. Installing the SIM Card and the Battery
Ensure that the gold contact area on the SIM card is facing
downward, and the beveled edge is properly aligned with the SIM
card slot.
Warning: Make sure to switch off the phone before taking out SIM
card, otherwise your SIM card might be damaged.
2. Removing the Battery and the SIM Card. Before removing the
battery and the SIM card, ensure that your phone is powered off.
3. Charging Batter. It takes about 2.5 hours to fully charge the
battery. While charging, the power indicator on the phone's
display will flash and rotate, if the phone is off a charging screen
will appear indicating the phone is charging. Once the charging
indicator stops flashing, charging has completed, if the phone is
off a charging-finished icon will appear. It is normal for the battery,
phone, and charger to get hot during the charging process.
Note: Battery must be charged in a well-ventilated area with a
temperature between -10℃~+55℃. Only use a charger provided
by manufacturer. Using an unauthorized charger might cause
damage and voids the warranty. If the charging temperature is too
high or too low, the phone will automatically give a warning and
stop charging to prevent damage.
4. Turn phone on/off To turn phone on/off, press and hold the End
key. If you turned on the phone without a SIM card installed you
will see the prompt "Insert SIM card". Once the phone is ready
you may see the following prompts: Enter phone password – if you
have set up phone lock password. Enter PIN – if you have set up
SIM card password. Search – the phone will search till finding
appropriate network connection.
Basic Functions
1 Making a call
When the logo of the service provider appears on the display
screen, you can dial or receive calls. The info bar at the upper left
corner of the display screen shows network signal strength (when
there are 5 info bars the signal is at its strongest). The call quality is
very likely to be affected by obstructions; therefore movement in a
small area can effectively improve call performance. Enter phone
number, then press Dial Key to make the call.