Startup; Area Of Application; Installation; Operation - Intimus FlashEx Instrucciones De Uso

GB
2

Startup

2.1 Area of application

CAUTION!
Damage to the cutting mechanism!
Only use the machine to shred approved
materials!
Shredding other types of material can result
in damage to the equipment (e.g. destruc-
tion of the cutting mechanism, etc.).
The intimus FlashEx data shredder is a machine to
shred ash memory devices such as USB sticks, mobile
phones, mini tablets, SSD cards, CDs and DVDs.
DANGER!
Risk of injury! Fire hazard! Damage to the
machine!
Shredding a mobile device with a battery
can generate a ash or an explosion.
Always remove batteries from battery-
powered devices before shredding!

2.2 Installation

1. Unpack and install the device.
2. Insert the plastic bag into the catch basket (Fig. 4/2).
3. Connect the device to the power supply via the
power plug (for information on the fuses which the
power socket requires, see „Technical Data", p. 14.
NOTE!
Please run an initialization process (see „Initia-
lization process", p. 11) before shredding for
the rst time.
10
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung
3

Operation

3.1 "i-control" operator unit

1
9
8
7
6
1
Function button
2
Forward button
3
"Motor overload" / "Motor failure" pilot lamp
4
"Catch basket full" pilot lamp
5
Reverse button
6
"Door open" / "Safety glass open" pilot lamp
7
"Lubricate cutting mechanism" pilot lamp
8
"Material jam" pilot lamp
"Cutting mechanism ready" / "Cutting mechanism not
9
ready" curved pilot lamps
Fig. 1 "i-control" operator unit
= Function button (Fig. 1/1)
1
Turns the machine on and o , and stops the shred-
ding process.
NOTE!
After 10 min without use the machine shuts
o automatically.
= Forward button (Fig. 1/2)
2
Starts the shredding process.
= "Motor overload" / "Motor failure" pilot lamp
3
(Fig. 1/3)
Lights up in the event of a motor overload or fai-
lure.
= "Catch basket full" pilot lamp (Fig. 1/4)
4
Lights up if the catch basket is full and needs to be
emptied.
= Reverse button (Fig. 1/5)
5
If the motor is still starts backward operation, if the
motor is running stops the operation.
= "Door open" / "Safety glass open" pilot lamp
6
(Fig. 1/6)
Lights up if the oor unit's door or the safety glass
is open (Fig. 2/1).
2
3
4
5
000083
93902 1 01/16