Technical Service; Replacement Parts - Hamilton Beach TEMPEST HBH650 Manual De Uso

Ocultar thumbs Ver también para TEMPEST HBH650:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Electrical Shock Hazard
Plug into a grounded outlet.
Do not remove ground.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
Cut Hazard
Always place lid on container when
blending.
Do not put hands, spoons, or other
utensils in container when blending.
Failure to follow these instructions can
result in broken bones, cuts, or other
injuries.
14

Technical Service

For assistance or replacement parts, call our Technical Service number:

Replacement Parts

The following components are subject to wear and should be replaced at least
yearly. We recommend keeping a replacement container and cutter on hand.
Part Description
64 oz. polycarbonate container
Cutter assembly
Electrical Shock Hazard
Disconnect power before
cleaning blender base.
Failure to follow these
instructions can result in
death or electrical shock.
866-285-1087 or 910-693-4277
8 a.m. – 5:00 p.m. EST Monday – Friday
www.commercial.hamiltonbeach.com
Burn Hazard
Always use caution when blending
hot contents.
Failure to follow these instructions can
result in burns.
Sanitizing
Sanitize using 1 tablespoon (15 ml) of household
bleach per 1 gallon (3.8 liter) of clean, cool water
(60°F/16°C), mixed according to the instructions
on the bleach.
1. Fill container with sanitizing solution, replace
lid and filler cap and run on LOW speed for 2
minutes. Empty container.
2. Wipe exterior with soft cloth dampened with
sanitizing solution.
3. Immerse lid and filler cap in sanitizing solution for
2 minutes.
4. Place empty container on base and run on HIGH
speed for 2 seconds to remove any moisture
from the cutter assembly.
5. When ready to use, rinse with clean water.
16
Part Number
6126-650
98650
18
3

Publicidad

Tabla de contenido
loading

Tabla de contenido