Set Of Characters - STONEX D2 Manual Del Usuario

5. Set of Characters

EN
Benchmark Elevation (BM),
DE
numeric input consists of 0 ~ 9, space, decimal, Ft in 1/16 inch
FR separator, the "+" and "-" signs.
Point ID (PtID)
ES
Point ID alphanumeric input consists of a ~ z, 0 ~ 9 and space.
IT
Accepting character in the existing value
TK
If there is no change for any particular character in the existing
entry field, press ENTER key to accept the old entry.
RU
Clearing all the existing entry field
Highlight the first entry field with "SPACE" character and press
ENTER key to clear the entire last input value.
To discard entry
Press ESC key to discard entry and restore old value.
Point ID increment
Point ID will be automatically incremented by 1 from the last point
ID, if point ID input field is not updated manually.
Set of Characters
6. Operation
Height and Distance measurement (electronic)
Example of an electronic measurement:
Always aim at the center of
bar code staff and focus the
staff image for accurate
measurement.
I
*
| 9
D2