Noise/Vibration Information; Changing The Sanding Sheet - Bosch GET 75-150 Professional Manual Original

12 | English
Random orbit sanders
No-load speed n
0
No-load orbital stroke rate
Sanding pad speed during coarse sanding
Orbit diameter
Sanding pad diameter
Weight according to EPTA-Procedure
01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-4:
h
Grinding: Normal mode
a
h
K
Grinding: Turbo mode
a
h
K
Polishing
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
1 609 92A 5FZ | (13.01.2020)
GET 75-150
-1
min 3300–7300
-1
min 6600–14,600
-1
min 290–640
mm
mm
kg
GET 75-150
3 601 B57 1..
dB(A)
dB(A)
dB
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.

Changing the Sanding Sheet

To remove the sanding sheet (8), lift it from the side and pull
it from the sanding pad (11).
Remove dirt and dust from the sanding pad (11), e.g. with a
paintbrush, before attaching a new sanding sheet.
The surface of the sanding pad (11) is fitted with a hook-
and-loop fastening, allowing sanding sheets with a hook-
and-loop backing to be secured quickly and easily.
GET 55-125
3300–7800
6600–15,600
200–480
4.5 3.5
150 125
2.6 2.4
/ II
GET 55-125
3 601 B57 0..
85
96
3
5.5 5.5
1.5 1.5
6.5 6.0
1.5 1.5
7.0 7.5
1.5 1.5
Bosch Power Tools
/ II
86
97
3