Setting The Ip Address Through The Arp/Ping; Method - Avigilon ENC-4P-H264 Guia De Instalacion

Setting the IP Address
Through the ARP/Ping Method
Complete the following steps to configure the encoder to use a
specific IP address:
1. Locate and copy down the MAC Address (MAC) listed on
the Serial Number Tag for reference.
2. Open Command Prompt.
From the Windows Start menu, select Run... then enter
cmd in the Run dialog box and click OK.
3. In Command Prompt, enter the following commands:
a.
b.
4. Reboot the encoder.
5. Close Command Prompt when you see the following
message:
Reply IP from <New Encoder IP Address>: ...
12
arp -s <New Encoder IP Address>
<Encoder MAC Address>
For example: arp -s 192.168.1.10 00-18-
85-12-45-78
ping -l 123 -t <New Encoder IP
Address>
For example: ping -l 123 -t 192.168.1.10