Technical Specifications; Package Contents; Safety Instructions - Parkside PPS 40 A1 Instrucciones De Funcionamiento

Introduction / Safety instructions
1 Plasma cutter
2 Handle
3 Mains plug
4 Ground terminal
5 Ground terminal plug
6 Plasma burner - power plug
7 Plasma burner - plug
8 Plasma burner
8a Plasma burner button
8b Nozzle clamping sleeve
8c Nozzles
8d Electrode
8e Diffuser
9 Overheat protection indicator lamp
10 Plasma burner - power socket
11 Ground terminal - connection socket
12 Plasma burner - connection socket
13 Current controller
14 Mains indicator lamp
15 Quick connector compressed air hose
16 Compressed air hose
17 On/off - switch
I switched on
O switched off
18 Condensation water tank
19 Manometer
20 Compressed air connection
21 Rotary knob to regulate the pressure
22 Hose clamp

• Technical specifications

Output: 15 - 40 A
Input: 230 V~ 50 Hz
Weight: approx. 5.2 kg
Dimensions 341 × 113 x 237 mm
Insulation class: H
Duty Cycle: 35 % at 40 A (25 °C)
20 % at 40 A (40 °C)
'Real' cutting
capacity: 0.1 mm – 12 mm
(depending on the material)
8 GB/CY
Copper:1 - 4 mm
Stainless steel: 1 - 8 mm
Aluminium:1 - 8 mm
Iron: 1 - 10 mm
Steel: 1 - 12 mm
Working
pressure: 4 - 4.5 bar
(4 bar preset)

• Package contents

1 plasma cutter
1 ground cable with terminal
1 cutting cable incl. cutting torch
1 compressed air hose with Quick-Connect
2 hose clamps
2 nozzles
3 electrodes (1 pre-assembled)
1 set of operating instructions
3 burner sleeves (1 pre-assembled)

• Safety instructions

WARNING!
f Please read through the
operating instructions
carefully before use.
Familiarise yourself with the
device, its proper use and
the safety notes based on
these operating instructions.
These form part of the
product and must be
available at all times.