Operating Your Log Splitter; Engine Controls - Troy-Bilt LS 27 TB Manual Del Operador

4
Operating
Your Log
Splitter
WARNING
IMPORTANT
Your log splitter may
be shipped with motor
oil in the engine. You
MUST check the oil
level before operat-
ing. Be careful not to
overfill.
Tongue
Jack Stand
Horizontal Beam Lock
Beam Locks
These two locks, as their name suggests, are used
to secure the beam in the horizontal or the vertical
position. The vertical beam lock is located next to the oil
filter. The horizontal beam lock is located on the beam
support latch bracket. See Figure 4-1.
Know Your Log Splitter
Cylinder
Log
Dislodger
Figure 4-1

Engine Controls

See the accompanying engine manual for the location
and function of the controls on the engine.
8
Control Handle
Wedge
Beam Assembly
Vertical
Log
Beam
Cradle
Lock
Vertical Beam Lock