Innova R/FM02 Manual De Usuario página 11

the station stored in this address.
SCAN AND STORE STATIONS
1. At FM, AM band: hold down the scanning button (11)
for 5 seconds and the radio will scan the stations once from the
low end to high end of the band automatically and store the
scanned stations according to sequence from the current storage
address.
2. The scanning may stop if any button is pressed during the
process of scanning storage.
3. It will automatically enter the first scanned station after
scanning storage
Prompt:
1. The last station for every scanning may be different.
2. Prior to scanning storage, please adjust the radio in accordan-
ce with the content of use of antenna so as to scan more stations
Note:
1. When listening to the scanning-stored stations, if it is not clear
or has noise, please conduct fine tuning with manual search.
2. When the function of scanning storage is used, the original
stored stations will be overwritten when stations are received.
3. Scanning-storage is only used in the set band. If you want to
scan other bands, please press the band conversion button to
switch to this band.
English User manual