Introduction; Features; Getting Started - Phonic i7350 Manual Del Usuario

INTRODUCTION

Congratulations on your purchase of the Phonic i750 digital
reverberator. The i750 is a high quality and easy-to-use stereo
digital reverberator. To take full advantage of the i750's functions,
and enjoy a long and trouble-free use, please read this user's
manual carefully and keep it for future reference.

FEATURES

● 16 digital effects
● Programs include hall, room, spring, rev vocal, slap delay and
multiple reverb variations
● 2/40-bit digital signal processing plus 24-bit A/D and D/A
converters
● Dedicated parameter control for adjusting each effect's main
parameter
● Auto-bypass when power is off
● Tap delay button and indicator
i750

GETTING STARTED

1. Check the AC voltage before connecting the plug. Choose
the main supply for the sound system with care. Do not share
sockets or earthing with light dimmers.
2. Run audio cables separately from dimmer wiring, using
balanced lines wherever possible. If necessary, cross audio
and lighting cables at 90 degree right angles to minimize the
possibility of interference. Keep unbalanced cabling as short
as possible.
. Check your cables regularly and label each end for easy
identification.
4. Before switching on the main power, keep all output rotary
faders all the way down to prevent damage or excessive
noise caused by bad level adjustment, wrong wiring, defective
cables, or bad connections.
Always turn on the i7350 before the power amplifier; turn off
5.
the i7350 after turning off the amplifier.
6. Always turn off the unit before connecting or disconnecting
the unit to the power source.
7. Never use any solvents to clean the unit. Clean it with a soft,
dry cloth.
1