TECshow COSMO GO 12 Manual De Usuario página 7

CH3
CH4
CH5
CH6
CH7
CH8
7. FAULTY DISPOSAL
Familiar Faulty
No display when power is on.
Light is out of control.
The light is off working for a while.
The beam is dark obviusly
Design and product specifications are subject to change without prior notice.
130-139
140-149
150-159
160-169
170-179 Red+Green+White
180-189
190-199 Green+Blue+White
200-209
210-255 Red+Green+Blue+White
0-255
0-255
0-255
0-255
0-255
0-255
1. Check if the power is correctly connected.
2. Check the power supplier´s output is DC24V.
1. Check if DMX address code is correctly set.
2. Check if the DMX cable is correctly connected.
1. Check the sensor is soldering on the LED PCB.
2. Check the temperature is too high.
3. Check the power supplier is damaged.
1. Check if the temperature is too high, and cause a fast fade.
2. Check if there is too much dust on the surface light.
Red+White
Green+Blue
Green+White
Blue+White
Red+Blue+White
Red+Green+Blue
Speed Adjustable
Master dimming
Red dimming
Green dimming
Blue dimming
White dimming
Disposal
| Tecshow Cosmo Go 12
English version
P. 7