Using The Title Menu; Pausing Playback Or Displaying A Still Picture; Resuming Playback From The Point Where Playback Stopped; Stepping Through Frames - Sylvania DVL1000 Manual Del Propietário

USING THE TITLE MENU

With a DVD containing a title menu, you can select de-
sired titles from the menu.
1
Press the TITLE button.
The title menu will appear.
2
Select the desired title.
Press the arrow buttons ( / /B/s) to change the
setting, and then press the ENTER button.
CALLING UP A MENU SCREEN DUR-
ING PLAYBACK
For DVDs
Press the MENU button to call up the DVD menu.
Press the TITLE button to call up the title menu.
Note
Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
1
Press the PAUSE/STILL button during play-
back.
Playback will pause, with sound
muted.
2
Press the PLAY button to resume playback.
RESUMING PLAYBACK FROM
DVD
1
Playback will stop, and "STOP"
will appear at the top-right of the
screen and then "MEMO ON" at
the top-left.
2
Notes
The resume function can be reset by pressing the
STOP button twice or by opening the disc loading
tray.
The resume function is not available with audio CDs.

STEPPING THROUGH FRAMES

DVD CD
1
PAUSE
The next picture frame is dis-
played with sound muted each
time the button is pressed.
2
PLAY
- 14 -
THE POINT WHERE
PLAYBACK STOPPED
Press the STOP button during playback.
Press the PLAY button. Playback will start from
the point where the previous playback session
was stopped.
Press the PAUSE/STILL button while playback
is paused.
Press the PLAY button to resume playback.
DVD
MEMO ON
PLAY
DVD
PAUSE
PLAY
EN
9F21