Stihl 0000-884-0251 Instrucciones De Servicio página 9

: Pull off old pad (Illustration C).
: Remove foam insert and insert new foam insert (Illustration D).
: Position new pad over ear defender and align (Illustration E).
: Press outer edges of pad firmly until pad lies snugly against ear
defender all the way round (Illustration F).
Technical Data and Approval,
1A) Weight
1B) Size
1C) Clamp force
2) Frequency [Hz]
3) Average attenuation
4) Standard deviation
5) Accepted protective effect
6) Tested and certified by:
1 PZT GmbH, Bismarckstr. 264 B, 26389 Wilhelmshafen, Germany,
Notified Body 1974; Notified by DAkkS
2 Michael & Associates, Inc., State College, PA, USA Accredited by
National Institute of Standards and Technology (NIST) National Voluntary
Laboratory Accreditation Program (NVLAP)
7) 3Production control: Module D by PZT
8) 4Hearing protector Class 5 tested to AU/NZS 1270. When selected,
used and maintained as specified in AS/NZS 1269, this protector may be
used in noise up to 110 dB(A) assuming an 85 dB(A) criterion. A lower
criterion may require a higher protector class.
Earmuffs complying with EN 352-3 are of medium size range or small size
range or large size range. Medium size range earmuffs will fit the majority
of wearers. Small size range or large size range earmuffs are designed
to fit wearers for whom medium size range earmuffs are not suitable.
Further information is available from any STIHL servicing dealer.
A, B, C,
G
D
9