Essentiel EBGZ 6 Instrucciones De Uso página 25

7. Put the hood back in place. Remove the washers and nuts pre-installed on the thermometer (2).
Then insert the thermometer into the hole above the hood. Slide the washers over the thermometer
screws under the hood and secure the assembly with the nuts.
8. Then attach the hood to the brackets (31) with two screws (4). Attach the caps (22) to the edges of
the body.
22
48
V.1.0
assembling the appliance
9. Separate the left feet (16 and 19) from the right feet (13 and 9). CAUTION: Check the position of the
holes carefully using the diagram.
Secure the left and right side shelves (28) with eight screws (B).
Secure the covers and fixed wheels (21) with the axle (33) and washer (D) and nut (E).
10. Attach the 2 side panels (18), one to the left feet (19 and 16), the other to the right feet (9 and 13),
with eight screws (C). The panels must be attached at the top and bottom.
49
V.1.0
assembling the appliance