Safety Warning - OPTIKA MICROSCOPES VC01 Manual De Instrucciones

1.0 SAFETy WARnInG
1. Handle the camera with care.
Be careful when handling the camera, do not drop it or subject it to strong shock or vibration
to prevent any damages to it. Do not disassemble it or place it on an unstable base.
2. Do not install the camera near electric or magnetic fields.
Installed the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers because the magnetic fields generate from above devices will distort the
video image.
3. Do not install the camera in the high temperature environment.
Installed the camera away from stoves, or other heat generating devices as the high
temperature could cause deformation, discoloration or other damages of the camera. Install
the camera at where the temperature range will stay between 0°C to 50°C (2°C to 122°C).
4. never face the camera toward the sun.
Never aim the camera at the sun or other extremely bright objects whether it is in use or
not.
5. Cleaning
Do not touch the surface of CCD sensor by hand directly. Use a soft cloth to remove the dirt
from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the
CCD sensor and the camera lens. When the camera is not in use, put the cover cap on the
lens mount.
Page 1