Working Mode - Steren COM-596 Manual De Instrucciones

Working mode

Normal mode
Scan barcodes directly, then the decoded information is transferred to the
receiver and is displayed on the computer or on the host. If transmission fails
(for example, if the distance of transmission is too much or receiver is not
open), then a three-tone sound will indicate to the user that there is an error.
Inventory mode
- When the scanner is not in the receiver´s operation range, use the inventory
mode.
- First set the "inventory mode" by scanning the barcode, in this way the
information will be saved in the scanner and when fi nished, scan the code
"Data transfer" to transfer it to your computer or host.
- You can also see how much information has decoded by scanning the code
"Total data number ".
- When you are fi nished transferring data, it is necessary to scan the "Delete
data" code so you can continue working.
18 18