Cameo OPUS SP5 Manual De Usuario página 7

7. Insert the animation wheel module into the module frame directly above the focus unit (tongue and groove principle) and fasten it tightly
to the frame with the two knurled screws (K). Ensure that the connection cables for the component are not pinched or damaged.
K
K
8. For easier and more convenient access, return the device head to a locked vertical position (tilt-lock).
9. Now connect the power and signal cables for the animation wheel module to the connection terminal on the left side of the module frame
(L). The power and signal plugs are not interchangeable and their respective position in the connection terminal is arbitrary.
L
10. Attach the head casing to the device head after re-attaching the anti-drop safety cable in its original location on the device head (see
point 3C). Now re-install the casing on the device head and secure it with the 4 quick-release bolts with bayonet fitting (turn clockwise) and
install the ring-shaped plastic cover on the exit lens.
Before operating the device, release the tilt-lock.
To exchange the animation wheel module with the framing shutter module, please follow this procedure in reverse order. Store unused compo-
nents in a dry, dust-free location and make sure that they cannot be damaged.
7