MAINTENANCE
Cleaning
Clean using ONLY a cloth dampened with neutral liquid detergent.
DO NOT CLEAN WITH TOOLS OR INSTRUMENTS. Do not use
abrasive products. DO NOT USE ALCOHOL!
Maintenance of the anti-grease filters
Traps cooking grease particles.
This must be cleaned once a month (or when the filter saturation
indication system – if envisaged on the model in possession –
indicates this necessity) using non aggressive detergents, either
by hand or in the dishwasher, which must be set to a low
temperature and a short cycle.
When washed in a dishwasher, the grease filter may discolor
slightly, but this does not affect its filtering capacity.
This filter has better performance than a standard filter due to
coupling between a metal filter made entirely of steel, and a
filter with several layers of metal mesh.
To remove the grease filter, pull the spring release handle.
Maintenance of the charcoal filter
It absorbs unpleasant odors caused by cooking.
The saturation of the charcoal filter happens after a more or less
prolonged use, depending on the type of cooking and the
regularity of cleaning the grease filter.
In any case, you need to replace the cartridge at least every 5
years.
It CANNOT be washed or regenerated
To obtain excellent suction performance, the filter is larger than the
standard filters and is installed on a support above the hood.
Fitting or replacing the carbon filter
1. Disconnect the hood from the mains.
2. Insert the cylindrical filter inside the support.
3. Secure the filter with the screws and plates
provided with the
appliance.
Proceed in reverse order to remove.
Replacing lamps
The hood is equipped with a lighting system based on LED
technology.
The LEDs guarantee an optimum lighting, a duration up to 10
times longer than the traditional lamps and allow to save 90%
electrical energy.
To replace lights, contact authorised spare part center.
54