Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION:
Congratulations on your purchase of a GT-SERIES speaker, engineered
& manufactured by Gemini Sound Products. This state of the art
speaker is backed up by a three-year warranty.
FEATURES:
All GT Speakers have the following:
• Push Button Connectors
• 1/4" TRS Input jack
• Metal Corners/Full Metal Grill
• High Temp Voice Coil
GT-1002:
• 12" Woofer
• 90 Watts RMS Trapezoid Speaker
• 8 Ohms Impedance
• 6" x 3" Dual Super Piezo Horn
GT-1202:
• 12" Woofer
• 100 Watts RMS Trapezoid Speaker
• 8 Ohms Impedance
• 11" x 5" Dual Super Piezo Horn
GT-1502:
• 15" Woofer
• 175 Watts RMS Trapezoid Speaker
• 8 Ohms Impedance
• 11" x 5" Dual Super Piezo Horn
GT-3002:
• Dual 15" Woofers
• 300 Watts RMS Trapezoid Speaker
• 4 Ohms Impedance
• 11" x 5" Dual Super Piezo Horn
CAUTIONS:
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit. There are,
NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a
qualified Gemini Sound Products service technician.
In the USA: If you experience problems with this unit, please call 1 (732) 738-9003 for
Gemini Customer Service. Do not attempt to return this equipment to your dealer.
3. Do not expose this unit to direct sunlight or to a heat source such as a
radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or
other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton
and packaging. This will reduce the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY
CONTROLS OR SWITCHES.
CONNECTIONS:
PLEASE NOTE IT IS VERY IMPORTANT THAT YOUR AMPLIFIER HAS
MATCHED POWER RATINGS!
Make sure your equipment is completely OFF and also lower ALL
VOLUME, LEVEL, & GAIN controls and before connecting the speaker.
1. Use a 1/4" SPEAKER CABLE (1) from your AMPLIFIER LINE OUTPUT
(2) to connect to your speakers 1/4" AMPLIFIER INPUT JACK (3).
2. Another way to connect your AMPLIFIER to your speaker is the
TERMINAL CUP (4). Use the PUSH-BUTTON CONNECTORS (5) to
connect the POSITIVE (-) and NEGATIVE (-) ends of a standard
SPEAKER WIRE (6) with a 12-GAUGE minimum thickness from your
AMPLIFIER LINE OUTPUT (2) to your speakers TERMINAL CUP (4).
3. You can also use the extra 1/4" AUXILIARY OUTPUT JACK (7) to CHAIN-
LINK an additional speaker using an additional 1/4" SPEAKER CABLE (8).
NOTE: GT-1002 DO NOT HAVE AN AUXILIARY OUTPUT JACK OR PUSH-BUTTON CONNECTORS!
OPERATION:
The speakers can be used in pairs for a NORMAL setup, or in groups of
four when CHAIN-LINKED together.
NORMAL SETUP:
1. Now turn on your MIXER or other signal source.
2. Then turn on your AMPLIFIER and increase the VOLUME or GAIN control
as recommended by the AMPLIFIERS owner manual.
3. Start playing from your TURNTABLE, CD PLAYER, MIC, etc. and adjust
• Stand Mounting Cup
PLEASE CALL: 1 (732) 738-9003 FOR GEMINI CUSTOMER SERVICE.
SPECIFICATIONS:
GT-1002:
GT-1202:
GT-1502:
GT-3002:
SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT
(3)
the volume controls from your mixer to a reasonable level.
CHAIN-LINK:
Only 1 additional speaker can be added to each speaker in a CHAIN-
LINK setup. Connect your speakers first then follow the steps for a
NORMAL setup, your AMPLIFIER should compensate for the extra speakers.
SHOULD YOU EXPERIENCE ANY DIFFICULTIES OR PROBLEMS,
Amplifier's Output Power:................................................................................................90 Wrms
Frequency response:..............................................................................................50Hz-20 kHz
Impedance...........................................................................................................................8 Ohms
Components:..........................................................................................................10" Woofer
Dimensions:............................................................................................W 12.5" x D 9" x H 18"
Features:...................................Push button connectors, 1/4" input jack, Stand mounting cup
Weight:..............................................................................................................20 lbs (9.1 kg)
Amplifier's Output Power:..............................................................................................100 Wrms
Frequency response:..............................................................................................40Hz-20 kHz
Impedance...........................................................................................................................8 Ohms
Components:..........................................................................................................12" Woofer
Dimensions:..............................................................................W 16.25" x D 10.75" x H 22.25"
Features:...................................Push button connectors, 1/4" input jack, Stand mounting cup
Weight:............................................................................................................27 lbs (12.2 kg)
Amplifier's Output Power:..............................................................................................175 Wrms
Frequency response:...............................................................................................35Hz-20kHz
Impedance...........................................................................................................................8 Ohms
Components:..........................................................................................................15" Woofer
Dimensions:.............................................................................................W 19" x D 14" x H 28"
Features:...................................Push button connectors, 1/4" input jack, Stand mounting cup
Weight:............................................................................................................44 lbs (20 kg)
Amplifier's Output Power:..............................................................................................300 Wrms
Frequency response:...............................................................................................35Hz-20kHz
Impedance...........................................................................................................................4 Ohms
Components:................................................................................................Dual 15" Woofers
Dimensions:.............................................................................................W 19" x D 14" x H 42"
Features:...................................Push button connectors, 1/4" input jack, Stand mounting cup
Weight:...............................................................................................................64 lbs (29 kg)
NOTICE FOR PURPOSE OF IMPROVEMENT.
6"x3" Dual super piezo horn
(318 x 229 x 457 mm)
Metal Corners/Full metal grill, High temp voice coil
11" x 5" Dual super piezo horn
(413 x 273 x 565 mm)
Metal Corners/Full metal grill, High temp voice coil
11" x 5" Dual super piezo horn
(483 x 356 x 711 mm)
Metal Corners/Full metal grill, High temp voice coil
11" x 5" Dual super piezo horn
(483 x 356 x 1067 mm)
Metal Corners/Full metal grill, High temp voice coil
Publicidad
