Recliners - Keyton H10 Manual De Instrucciones

massage movement will locate on the desired point. Every two minutes a massage is
performed on the whole back. You can initiate the localized massage with a short press
(less than one second). In order to activate again the complete vertical movement, press
any massage key.
NOTE: You should activate any manual massage (Tapping, Rolling or Kneading), otherwise
the localized Rolling massage will start by default.

Recliners

Back Recliner. Manual control. (22)
To operate the back recliner independently, keep these keys pressed until the recliner has
reached the desired position. Once the key is released, the recliner will automatically stop.
General Recliner. Automatic control. (22)
To recline the back and the footrest simultaneously press these keys for a short time (less
than one second). Once pressed, the chair will recline to its maximum. To stop the reclining
movement at any specific position, press any of these keys again.
Footrest Recliner. Manual control. (22)
For the independent operation of the decline of the footrest, hold one of these keys until
the footrest is brought into the desired position. When you stop pressing the button, the
recliner stops automatically.
Footrest Recliner. Automatic control. (22)
To recline the footrest independently, press one of these keys for a short time (less than
one second). Once pressed, the footrest will recline to its maximum. To stop the reclining
movement at any specific position, press any of these keys again.
IMPORTANT
When you run any of the recliners, the massages and massage programs are stopped for
safety reasons for a moment, to continue thereafter.
13
KEYTON-MANUAL-17-05-16.indd 13 17/5/16 19:38