Important Safety Instructions; General Safety Warnings - Remington RM4000 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• IMPORTANT SAFETY INSTRUCTIONS •
WARNING:
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
READ ALL INSTRUCTIONS BEFORE OPERATING
1. SAVE THESE INSTRUCTIONS - This manual contains
important safety and operating instructions.
2. Before using this product, read all instructions and cautionary
markings on the battery, battery charger, and the unit(s) powered
by the battery.
3. Do not handle the charger, including the charger plug and
charger terminals, with wet hands.
4. Do not charge the unit outdoors.
WARNING:
RM4150 batteries with this unit. DO NOT use any other type
of battery, attachment or accessory with this unit. Other
types of batteries, attachments or accessories could lead to
serious injury, property damage or damage to the unit.
WARNING:
or RM4150 batteries with an RM4110 battery charger. DO
NOT attempt to use any other battery charger to charge
RM4130, RM4140 or RM4150 batteries. Other types of
battery chargers may cause the batteries to burst, resulting
in fire, personal injury or property damage.
WARNING:
charger to charge RM4130, RM4140 or RM4150 batteries.
DO NOT attempt to charge any other batteries with an
RM4110 battery charger. Other types of batteries may
burst, causing fire, personal injury or property damage.
Read all safety warnings and all
Only use RM4130, RM4140 or
Only charge RM4130, RM4140
Only use an RM4110 battery

GENERAL SAFETY WARNINGS

Read the instructions carefully. Be familiar with the controls and
proper use of the unit. Know how to stop the unit and disengage
the controls quickly.
Stay alert. Do not operate this unit when tired, ill or under the
influence of alcohol, drugs or medication.
Never allow children to operate the unit. Teens must be trained,
accompanied and supervised by an adult. Never allow adults to
operate the unit without proper instruction.
All guards and safety attachments must be installed properly
before operating the unit.
Inspect the unit before use. Check for damaged parts. Make sure
all parts operate properly. Make sure all fasteners are in place
and secure. Make sure all moving parts are properly aligned and
are not bound. Replace parts that are cracked, chipped, or
damaged in any way. Have all damaged or improperly working
parts repaired or replaced by an authorized service center. Do
not operate the unit with loose or damaged parts.
Be aware of risk of injury to the head, hands and feet.
Carefully inspect the area before starting the unit. Remove
rocks, broken glass, nails, wire, string and other objects that
may be thrown or become entangled with the unit.
Clear the area of children, bystanders and pets; keep them
outside a 50-foot (15 m) radius, at a minimum. Even then, they are
still at risk from thrown objects. Encourage bystanders to wear
eye protection. If you are approached, stop the unit immediately.
This unit is intended for occasional, household use only.
Do not allow the unit to be used as a toy.
SAFETY WARNINGS FOR ELECTRIC UNITS
General Electric Safety
Do not expose the unit to rain or wet conditions. Store the unit
indoors.
Do not handle the unit with wet hands.
Avoid dangerous environments. Do not operate the unit in the
rain, in wet conditions or on wet surfaces. Moisture is a shock
hazard.
To reduce the risk of electric shock, avoid body contact with
grounded conductors, such as metal pipes or wire fences.
Do not operate the unit in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Battery Charger Safety
Follow all charging instructions. Do not charge the battery
outside the temperature range specified in these instructions.
Improperly charging the battery or charging the battery outside
of the specified temperature range may damage the battery and
increase the risk of fire.
A nameplate on the unit indicates the voltage used. Never
connect the unit to an AC voltage that differs from this voltage.
An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result in a
risk of fire, electric shock or electrocution.
Do not use multiple extension cords.
Make sure the extension cord is heavy enough to carry the
current drawn by the unit. An undersized extension cord will
cause a drop in line voltage, resulting in a loss of power and
overheating. If in doubt, use the next heavier gauge cord. The
smaller the gauge number, the heavier the cord.
3

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rm4000b

Tabla de contenido