Introduction; Reading The Use & Maintenance Manual; Symbols And Operators' Competence Levels; Compliance Certificate - CAMPAGNOLA Star-up 12V -18V Manual De Uso

1 - INTRODUCTION

1.1 Reading the Use & Maintenance Manual
Before working on the equipment, carefully read and understand this Use & Maintenance Manual in order to safeguard
the operator and to avoid damaging the machine. These instructions describe how to operate the equipment safely,
economically and in compliance with the current safety regulations. Following these instructions helps avoid dangerous
situations, reduces repair costs and down-time and extends the life-span of the machine. This manual is to be kept
legible and in good condition. The operating and maintenance staff must have it at hand, so that it can be read
whenever needed.

1.2 Symbols and operators' competence levels

All operations herein described must be performed by qualified personnel and in compliance with the manufacturer's
manual. Each procedure is accompanied by an icon which indicates the necessary operator's qualification. The
indication to identify the personnel qualifications are given below.
Operator
Personnel who can install, operate, adjust, clean, repair, transport the equipment and carry out its routine maintenance.
Qualified mechanic
Personnel capable of installing, servicing and/or repairing the equipment as directed in this manual.
AUTHORIZED SERVICE POINTS
These are the centres, indicated by Sales Staff of CAMPAGNOLA S.r.l., authorized to repair the products.
Warning!
Precautions to be taken in order to safeguard the operators and bystanders in the work area.
Important!
Precautions to be taken in order to avoid problems with the equipment and to operate it in compliance with the
current safety regulations.

1.3 Compliance certificate

All the products marketed in the European Union (EU) must fully comply with the European Council Directive
2006/42/EC. The compliance certificate is supplied by the manufacturer with the Use & Maintenance Manual.

1.4 Receiving the product

When receiving the product, make sure:
• the product has not been damaged during transport;
• the product supplied matches with the order. Check that all parts have been delivered (refer to "Product
Description", "Specifications" chapter). If problems arise, contact the manufacturer's. Service Department quoting all
details indicated on the nameplate (refer to "Product Identification", "Specifications" chapter).

1.5 Warranty

Please refer to the enclosed "Warranty claim" form.

2 - SAFETY PRECAUTIONS

2.1 Precautions

Warning!
Campagnola S.r.l. declines all responsibilities if the precautions below are not taken.

2.1.1 Results of the tests made according to the Laws

ELECTROMAGNETIC COMPATIBILITY LEVEL
The unit complies with the 2004/108/CE electromagnetic compatibility Directive.