Electrolux EKF955 Manual De Instrucciones página 5

GB
BREW: Indicating the interface is in immediately brewing status
When starting delay start time, "AUTO" turns on, "BREW" goes out; once the delay
start time is reached, start brewing, at this time, "AUTO" turns off, "BREW" turns on,
after finishing brewing, "BREW" turns off.
The display shows the actual time, when pressing the program button to adjust the
delay start time, it shows the delay start time, three seconds after adjustment, it
resumes showing the current time.
Sound prompt
1. When Brewing ends, a long beep will be heard.
2. After brewing and entering keep warm status, 3 beeps will be heard.
3. After 2 hours of keeping the coffee warm, 5 beeps will be heard.
Operation function description
Before starting any operation you must set the time of day by pressing the H and MIN
buttons repeatedly.
．" " Button
1
Press " "Button once to start brewing immediately, "BREW" will show on the
display, the dual color light illuminates red.
Press " "Button again to stop all brewing, heating, or aroma control, the LED
goes out, the keep warm function stops.
2． " " Button
Press " " Button once, "AROMA "will show on the display.
Press " " Button again, the" AROMA "on the screen turns off and the aroma
control is cancelled, press this button again to repeat.
3．
"PROG" Button
Press "PROG" Button once to enter the start delay time. The screen will show 6:
00, the dual color LED light illuminates green and also flashes; press "H" &
"MIN" buttons repeatedly to set the delay start time required, the LED will stop
flashing three seconds after set-up and show the current time.
4．"AUTO" Button
Press the "AUTO" Button once to start the delay time function, "AUTO" will
show in the display, the dual color light illuminates green. Once the delay start
time has elapsed, brewing will start; "AUTO" on the screen goes out, "BREW"
turns on, the dual color light illuminates red.
Press the "AUTO" Button again, to cancel the delay time function, the "AUTO"
on the screen turns off, the LED light goes out, then press again to repeat the
above actions.
4