Safety Instructions; General Instructions; Personal Protective Equipment - Dolmar CS-246.4C Instrucciones De Manejo

Intended use of the machine
This multi function power head is intended for driving an approved attachment
listed in this instruction manual. Never use the machine for the other purpose.

SAFETY INSTRUCTIONS

General instructions

- To ensure correct operation, user has to read this instruction manual to make
himself familiar with the handling of the Multi Function Power Head. Users
insufficiently informed will risk danger to themselves as well as others due to
improper handling.
- It is recommended only to lend the Multi Function Power Head to people who
have proven to be experienced with Multi Function Power Heads.
Always hand over the instruction manual.
- First users should ask the dealer for basic instructions to familiarize oneself
with the handling of an engine powered cutter.
- Children and young persons aged under 18 years must not be allowed to
operate the Multi Function Power Head. Persons over the age of 16 years
may however use the device for the purpose of being trained only whilst
under supervision of a qualified trainer.
- Use Multi Function Power Heads with the utmost care and attention.
- Operate the Multi Function Power Head only if you are in good physical
condition. Perform all work calmly and carefully. The user has to accept
liability for others.
- Never use the Multi Function Power Head after consumption of alcohol or
drugs, or if feeling tired or ill.
- National regulation can restrict the use of the machine.

Personal protective equipment

- The clothing worn should be functional and appropriate, i.e. it should be tight-
fitting but not cause hindrance. Do not wear either jewelry or clothing which
could become entangled with bushes or shrubs.
- In order to avoid either head-, eye-, hand-or foot injuries as well as to protect
your hearing the following protective equipment and protective clothing must
be used during operation of the Multi Function Power Head.
- Always wear a helmet where there is a risk of falling objects. The protective
helmet (1) is to be checked at regular intervals for damage and is to be
replaced at the latest after 5 years. Use only approved protective helmets.
- The visor (2) of the helmet (or alternatively goggles) protects the face from
flying debris and stones. During operation of the Multi Function Power Head
always wear goggles, or a visor to prevent eye injuries.
- Wear adequate noise protection equipment to avoid hearing impairment (ear
muffs (3), ear plugs etc.).
- The work overalls (4) protect against flying stones and debris.
We strongly recommend that the user wears work overalls.
- Special gloves (5) made of thick leather are part of the prescribed equipment
and must always be worn during operation of the Multi Function Power Head.
- When using the Multi Function Power Head, always wear sturdy shoes (6)
with a non-slip sole. This protects against injuries and ensures a good footing.
Starting up the Multi Function Power Head
- Please make sure that there are no children or other people, also pay
attention to any animals in the working vicinity.
- Make sure that the attachment is attached in place, the control lever for easy
action and check for proper functioning of the lock-off lever.
- Motion of the attachment during idling speed is not allowed. Check with your
dealer for adjustment if in doubt. Check for clean and dry handles and test
the function of the start/stop switch.
Diagrammatic figure
15 Meters
3