Publicidad
Welcome to the
family
IMPORTANT – keep for future reference future: please read carefully. Check
the contents of the package with the help of the parts list and contact your
dealer immediately in case of missing or damaged parts.
It is recommended that you bring a level, a hammer, a screw driver ,a meter and
a cutter. Read the installation instructions before you begin.
Some useful tips to guarantee a long life of your shed:
Store the shed in a cool and dry room if it cannot be installed immediately.
Remove the packaging two days before assembly and slightly separate the
boards and beams. This enables the wood to adjust to the temperature and hu-
midity level of the environment. Never put the wood in direct sunlight or rain.
Maintenance: Before assembly we recommend to treat the beams with an
oil-based protective product to protect the wood from fungus, blackening, and
insects. After assembly, a finishing product should be applied to protect the
wood from cracking cracks and deforming. By regularly applying a new fini-
shing layer the life of your shed shall be lengthened.
It is recommended also to treat the inside and the door of the shed with a
wood protective product. This should be repeated every 3 years.
Wood 'lives':
Because wood lives, it might crack in dry weather conditions. When it's humid
weather, the cracks will disappear again. By treating this natural product with
care, you will enjoy it for a very long time.
List of tools needed for assembly:
Publicidad
