Introduction; Description - SKF 729659 C Instrucciones De Uso

1.

INTRODUCTION

The SKF electric hot plate 729659 C is intended for heating bearings
and other machinery components prior to mounting. It is suitable for
components with a bore of up to approximately 100 mm (4 inch) or
with a weight of up to 3-4 kg. The hot plate has a maximum
temperature of 200 °C (390 °F) and is equipped with a lid for retaining
the heat, at the same time dirt is prevented from entering the bearing.
2.

DESCRIPTION

The electric hot plate 729659 C consists of a heating plate housed in a
metal casing with removable cover. The temperature is controlled by
means of a thermostat.
A
B
C
D
A Lid
B Thermostat
C Heater indication lamp
D Power switch
SKF 729659 C
o o
110 C / 230 F
ON
OFF Bearing Heater 729659C
400
Electric Hot Plate
240
7